FlexScan3D PatchNotes
-
Patch Notes: 3.3.21
September 28th, 2020
New Features Added button to remove the latest 5 scan data on Handheld Scanning Added Test Capture button to check real scan brightness of Compact L/S/H Series H3 Marker Alignment Beta Release (Requires >= H3 Firmware 3.2.0) Improvements Improved H3 Alignment Performance Improved Depth Map Color Visualization on Handheld Scanning Improved H3 Scanning speed (Requires […]
Read Now -
Patch Notes: 3.3.20.4
June 19th, 2020
Bug Fixes Fixed issues with FlexScan3D crashing when scanner disconnected. Fixed issues with loading ply file which has Unicode characters. Fixed issues with FlexScan3D crashing when wrong number is typed into the exposure edit box in G3 plugin. Improvements Improved UI of the Network Configuration Tool.
Read Now -
Patch Notes: 3.3.12
October 10th, 2019
Bug Fixes Fixed alignment errors when using marker detection and alignment. Fixed 100% CPU usage issue when streaming live video with the ScanBox Plugin. Fixed issues with the mesh decimation tool. Fixed issues with the mesh rebuilding tool. Improvements Improved smooth merge clean up speed. Added Features Circle Selection tool. Subtract mesh selection. The hotkeys […]
Read Now -
Patch Notes: 3.3.11
February 25th, 2019
Updates Measurement Tool Updates Coordinate Tool has been renamed to Measurement Tool. The updated tool is easier to use and has a wider range of capabilities. Parameter Dialog A simple dialog now appears when creating new entities explaining how to generate the measurement and which parameters are required. Circle/Sphere Measurements Generate circle/sphere entities and determine […]
Read Now -
Patch Note: 3.3.10
October 4th, 2018
3.3.10 General New network config tool is bundled with Flexscan 3D. It helps you to configure your network settings for HDI Compact series and TriggerBox v2.0 Support Active Area and Spacing Interval configuration of HDI Compact C Series Improved mesh processing time for HDI Compact C Series Drivers Beta Support for TriggerBox v2.0. Enables you […]
Read Now -
Patch Notes: 3.3.9.0
July 13th, 2018
General New Render Entity tool for drawing 3D entities and building own Co-ordinate system. Added Option to change the resolution of TriggerBox. Fixed HDI Compact inactivity timeout issue. Fixed Scanner Settings UI issue. Drivers Beta Support for Basler Pylon Drivers. Enables you to use Basler cameras. Pylon Driver is included in the installer. PTGrey Spinnaker […]
Read Now -
Patch Notes: 3.3.8.325
March 5th, 2018
General New Co-ordinate System tool for exact positioning objects in space for Export and Deviation Comparison Re-Arranged the Mode Menu UI Added Option to render a ground plane, and render local co-ordinate axis Beta support for Geometric Entities Drivers Beta Support for PTGrey Spinnaker Drivers. Enables you to use BlackFly S. You must install the […]
Read Now -
Patch Notes: 3.3.8.321
January 11th, 2018
Minor Updates Added World Plane Visualization and Rendering Added Local Axis Rendering Fixed Rotary Calibration for the C210. (Previously only C109 was working) G3 Driver now remembers Exposure, FrameRate and automaticly sets minimum point spacing Support for Network Settings Changes
Read Now -
Patch Notes: 3.3.8.320
December 29th, 2017
Updated Camera Calibration Library to 3.3 from 2.4 Now supports both Photogrammetric Dots and Check-board calibration Patterns Major G3 Driver Improvements Support Automatic GoAccelerator for faster scanning Rotary calibration, was previously in-correct, now it’s accurate. Added HDR interface for G3’s Driver Support for Network Settings Changes Improved driver support for new Light-Weight Rotary Table Stability […]
Read Now -
Patch Notes: FlexScan3D 3.3.8.3xx
November 14th, 2017
New Drivers and support for: Camera based licenses Polyga Trigger Boxes for high speed scanning AA Motors Drivers, for Heavy Duty and Light Weight Rotary Support Gocator 3109, 3210 and 3506 Series Scanners Moved Previous HDI 109 and HDI 120 Driver to Legacy Mode Support for a new Light Weight Rotary Table Changes: Modified core […]
Read Now